咨询热线:

0531-88771136

您的当前位置: 首页 > 新闻中心 > 正文

怎么制造出使用寿命长的注塑模具?

来源:http://www.jnhjgs.cn     发布时间:2020-09-09 16:12:42    点击:

  注塑模具可以率的加工产品和批量生产各种构造复杂的塑胶产品,生产效率高,精度准,受到很多制造商的青睐。怎么才能使模具的使用时间更长效率更高是很多制造厂家都在考虑的问题?模具的使用寿命除了本身材质好以外,还需要对模具做一些加工处理,让模具的使用效率事半功倍,增加使用期限。
  Injection mold can process products with high efficiency and mass production of various complex plastic products. With high production efficiency and accurate precision, it is favored by many manufacturers. How to make the mold use longer and more efficient is a problem many manufacturers are considering? The service life of the mold is not only good in its own material, but also needs to do some processing for the mold, so that the efficiency of the mold can be doubled with half the effort and the service life can be increased.
                       济南模具
  首先,有些塑料熔料在生产过程中会腐蚀模具型腔表面,还有的原料里有些磨粒磨损模具,需要在制造模具时对模具表面进行电镀处理或镀镍处理,保证模具的耐腐蚀性和耐磨性更强,使注塑模具使用时间长。
  First of all, some plastic melts will corrode the surface of the mold cavity in the production process, and some abrasive particles in the raw materials will wear the mold. Therefore, the surface of the mold needs to be electroplated or nickel plated when manufacturing the mold, so as to ensure that the corrosion resistance and wear resistance of the mold are stronger, and the injection mold can be used for a long time.
  其次,在塑件成形过程中,模具型腔的温度有时会达到300度的高温,为避免模具不受高温的影响,做出合格的产品,模具在制造过程中必须要进行热处理加工制造,让模具使用效率更高,延长模具的使用时间。
  Secondly, in the forming process of plastic parts, the temperature of the mold cavity sometimes reaches 300 degrees. In order to avoid the influence of high temperature on the mold and make qualified products, the mold must be processed by heat treatment in the manufacturing process to make the mold more efficient and prolong the use time of the mold.
  注塑模具在制造过程中,要经过先进的设备反复修配和调整做各种处理以保证模具的后期使用生产效率高,寿命时间长。
  In the manufacturing process of injection mold, advanced equipment should be repeatedly repaired and adjusted to do a variety of processing to ensure the later use of the mold, high production efficiency and long life time.
 
联系我们 contact

山东济南模具_铝合金压铸厂-济南宏捷模具有限公司

电话1:13173017488

电话2:18615459955

传真:0531-88771136

邮箱:hlm369@126.com

地址:山东省济南市大桥镇大王村北跨商务中心后三层白楼

山东济南模具_铝合金压铸厂-济南宏捷模具有限公司 手机: 13173017488 咨询热线: 0531-88771136 咨询热线:18615459955    邮箱:hlm369@126.com

公司地址: 山东省济南市大桥镇大王村北跨商务中心后三层白楼