Reasonable and effective reduction of the processing cost of injection moulds can effectively improve the economic benefits of enterprise production, effectively reduce the production cost of enterprises, and is conducive to the promotion of market competitiveness of enterprises and products.
Firstly, the injection moulds should be selected reasonably.
Before the production of products, carefully selecting and designing reasonable injection moulds is the most basic way to reduce costs. Different die design structures have different requirements for product materials, which are good or bad naturally. Excellent die has high yield, less waste and low natural production cost.
Secondly, reasonable processing technology should be adopted.
For the same product, the quality and quantity of raw materials required are different with different production and processing technologies. According to the characteristics of the products, on the premise of meeting the quality requirements, the production cost can be effectively reduced by using the method of improving the processing technology.
Then, adopt scientific and reasonable management在生产过程中，采用科学合理的管理方式。强化成本核算，在生产、供应、销售以及财务等各个环节要加强管理。把生产成本中的原材料、辅助材料、燃料、动力、工资、制造费、行政费等，每一项费用细化到单位产品成本中，合理的规范管理，严禁浪费。
In the process of production, scientific and reasonable management mode should be adopted. Strengthen cost accounting and strengthen management in production, supply, sales and finance. The cost of raw materials, auxiliary materials, fuel, power, wages, manufacturing costs, administrative fees in production costs are refined into unit product costs. Reasonable management is standardized and waste is strictly prohibited.
Enterprises reduce all kinds of unnecessary waste in each link, so as to achieve the purpose of reasonable storage and use of materials, reduce costs and improve efficiency. This not only guarantees the reasonable needs of production, but also reduces the waste of funds.
In recent years, the quality and quantity of injection moulds in our country have developed rapidly, but compared with the advanced technology abroad, the technical level of most enterprises in our country still needs to be improved. At present, compared with the advanced technology level abroad, the following problems exist in the injection mould industry in China:
First, the contradiction between supply and demand is difficult to solve in the short term.
The domestic market satisfaction rate of injection moulds has been less than 74%, among which the large, precise and long-life moulds have lower satisfaction rate. At present, the moulds of developed industrial countries are speeding up their transfer to China, and more and more international purchases are being made. Market demand is strong, production development is still difficult to keep up for a while, and the situation of shortage of supply and demand will continue for some time.
Second, unbalanced industrial development虽然个别企业的产品已达到或接近先进水平，但是总体来看，模具的精度、生产周期、使用寿命等指标与国外相比尚有较大的差距，产业发展总体水平较低。
Although the products of individual enterprises have reached or approached the international advanced level, on the whole, the precision, production cycle, service life and other indicators of the die still lag behind those of foreign countries, and the overall level of industrial development is relatively low.
Third, the overall technological level is backward.
After the technological transformation in recent years, some enterprises have advanced technology and equipment, and even some of the three-capital enterprises have not lagged behind foreign countries in equipment level. However, compared with most enterprises, the process equipment is still relatively backward. More importantly, the poor ability of organizational coordination of enterprises makes it difficult to integrate or mobilize social resources.
Fourth, the lack of innovation capability in enterprise development首先技术人员比例低、水平不够高，其次科研开发投入少。更重要的是大多数企业观念落后，对创新和开发没有足够的重视。
Firstly, the proportion of technicians is low and the level is not high enough, secondly, the investment in scientific research and development is low. More importantly, most enterprises are backward in concept and do not pay enough attention to innovation and development.
Injection mould enterprises should not only pay attention to product development, but also pay attention to product innovation. Only when enterprises have strong strength in technical personnel and technological innovation, and can accurately grasp the individual needs of customers in the first time, can they develop steadily and rapidly.