咨询热线:

0531-88771136

您的当前位置: 首页 > 新闻中心 > 正文

塑料模具制品表面涂装的优点

来源:    发布时间:2019-05-08 11:58:05    点击:

  今天,一位顾客问我塑料制品的表面是否需要油漆,对此我也很无奈。因为这个问题仍然取决于客户的要求。
  Today, a customer asked me if I needed paint on the surface of plastic products, and I had no choice about it. Because the problem still depends on the customer's requirements.
  塑料制品表面喷漆可以保证产品的亮度。因为塑料产品本身很难反光。因此,塑料零件看起来更暗。如果塑料零件表面的皮革线被加上,它会变得更暗。因此,一些客户会在塑料零件表面喷涂一层油漆,以追求美丽的表面。这确保了产品的亮度。
  Spray paint on the surface of plastic products can ensure the brightness of products. Because plastic products themselves are difficult to reflect light. As a result, plastic parts look darker. If the leather thread on the surface of plastic parts is added, it will become darker. Therefore, some customers will spray a layer of paint on the surface of plastic parts in order to pursue a beautiful surface. This ensures the brightness of the product.
  塑料制品表面涂装可以降低塑料制品的废品率。白色塑料制品的废品率一直是注塑行业的头痛问题。如果表面涂漆,产品的缺陷将被掩盖,产品的废品率将降低。
                               山东模具
  Surface coating of plastic products can reduce the waste rate of plastic products. The waste rate of white plastic products has always been a headache in the injection industry. If the surface is painted, the defects of the product will be covered up and the rejection rate of the product will be reduced.
  因此,在有要求的塑料零件表面喷漆非常有用。然而,喷漆时还有另一个注射成型过程。成本会增加。
  Therefore, it is very useful to spray paint on the surface of required plastic parts. However, there is another injection molding process when spraying paint. Costs will increase.
  这是两者的优点和缺点。
  This is the advantage and disadvantage of both.
 
联系我们 contact

山东济南模具_铝合金压铸-济南宏捷模具有限公司

电话1:13173017488

电话2:18615459955

传真:0531-88771136

邮箱:hlm369@126.com

地址:山东省济南市大桥镇大王村北跨国际商务中心后三层白楼

山东济南模具_铝合金压铸-济南宏捷模具有限公司 手机: 13173017488 咨询热线: 0531-88771136 咨询热线:18615459955 邮箱:hlm369@126.com

公司地址: 山东省济南市大桥镇大王村北跨国际商务中心后三层白楼

版权所有 Copyright © 2016-2018 山东济南模具_铝合金压铸-济南宏捷模具有限公司 网站建设:济南诺商 流量统计:
网站地图XMLTXT